Cảnh báo đường xu hướng cho Metatrader

[mirber]

chào các cậu
tôi đã học cách sử dụng đường xu hướng
nhưng, các bạn có biết liệu có bất kỳ cảnh báo đường xu hướng nào cho metatrader hoặc những người khác không
ví dụ: nếu giá cao hơn 1% so với đường xu hướng đó, nó sẽ kích hoạt cảnh báo. Cảm ơn.
tôi không muốn ngồi trước máy tính 24 giờ...

[Alnoho]

1 (Các) tệp đính kèm Các đường chéo được vẽ trên các chỉ báo MACD và STOCHASTICS có thể được sử dụng rất hiệu quả để đưa ra các điểm vào. Tệp đính kèm hiển thị các đường chéo STOCHASTICS có điểm bắt đầu và điểm tựa cụ thể (trên 90 hoặc dưới 10). Chỉ số Stochs hiển thị điểm bắt đầu bẫy đường chéo HỖ TRỢ (dọc màu vàng đầu tiên) và điểm tựa tiếp theo (dọc màu vàng thứ hai). Từ điểm tựa đó cho thấy phân kỳ MUA (giá có đáy thấp hơn và Stochs có đáy cao hơn). Đây là nguyên tắc tương tự như các đường chéo MACD. CÂU HỎI CỦA TÔI LÀ - điều này có thể được mã hóa để đưa ra tín hiệu mua và bán không? Trân trọng George

[Giyeno97]

thanks a lot Keit really appreciate your help now, is it possible to do the same thing for the RSI (4) thanks and merry christmas to all of us green pips to all of us for 2011

Here are your changes, if your not good with english have some one there translate it to you, all you need to know is in the code itself read it. Keit

Here are your changes, if your not good with english have some one there translate it to you, all you need to know is in the code itself read it. Keit

[zal000]

madeinparis This version has both the stochastic and RSI indiors. I also corrected some bugs with the delay function as well as shorting the delay to 15 seconds. This version defaults to the RSI indior If you change the extern UseRSI = False; this will show the Stochlastic indior as the version you now have. The screen shot shows both the builtin and the trendline indiators are the same. The version you have has a small bug in the delay function but donot effect the results of the trendline. you would be better to use this one, even though. I would of edited my last post but the Mods here treat every one like little kids, if someone crys because they dont like what you posted the mods just removes your posts and limit other rights. Hell they dont even have the guts to tell you what in your posts was so upsetting. what BS. Keit Inserted Code ValueOnClose = False, /True alert on close of bar, False in real time. CrossAbove = True, /True alert on cross above, False on cross below. CrossStochSign = True, /True will use Signal Line, False uses Main Line. UseRSI = True; /True will use the RSI, False will use Stochastic.

https://www.forexibroker.com/attachm...1472564847.mq4

[zzsran11]

I have been looking for an indior that sounds an alarm on a RSI trend line break. I just tried yours. It may be something that I have done, but it keeps dinging after the trend line has been broken and still keeps dinging even after I have removed it. Any price movement sets it off. It is an idea with great possibilities in my opinion. A note of appreciation for your efforts in programming this most useful of tools.

[zzsran11]

Sorry Cowboy that was my error. Problem solved. Again, I appreciate your effort. There is (or was) a discussion on the use of this RSI trend line sort of thing at RSI Bollingers divergence 15 Min on forum. I have been working on something similar and getting promising results. I will let you know how your alert indior works out.

[zal000]

Wab Can you tell me what you were doing to make it sound off like that. I may need to correct/change something to prevent it for others. Keit

Sorry Cowboy that was my error. Problem solved. Again, I appreciate your effort. There is (or was) a discussion on the use of this RSI trend line sort of thing at RSI Bollingers divergence 15 Min on forum. I have been working on something similar and getting promising results. I will let you know how your alert indior works out.

Sorry Cowboy that was my error. Problem solved. Again, I appreciate your effort. There is (or was) a discussion on the use of this RSI trend line sort of thing at RSI Bollingers divergence 15 Min on forum. I have been working on something similar and getting promising results. I will let you know how your alert indior works out.

[zzsran11]

It wasn't your RSI Trend Line indior. I had another chart with Chin bars on it, that I was unaware of, hidden beneath the one with the RSI Trend line on it. What an amateur mistake to make. For some reason the Chin Bars were not making their usual alert sound and that is what confused me.(Embarrassed.) I use RSI3 trend line breaks a lot. I find if I combine those with trend lines on the chart, the RSI trend lines usually break first and then the chart ones follow. An alert on a RSI trend line break is a great feature and i was surprised when I started looking for an indior that signals this that more were not readily available. Your contribution is a great one. Did you get it set up so that it has a dialogue window and an on off switch? I do find that I have a problem getting it to signal consistently. It may be something I am doing or not doing. I am committed to nailing the Forex Game in 2011 an this is one tool that I feel will be of great use. I will post some charts when I get it all working. Have a Good New Year.

[zal000]

wab theres a time delay(15 seconds) built in to prevent it from going off when your trying to set the trend line. So if your dragging the line accross the RSI it will not go off unless you leave it there for 15 seconds or more (tick based). It also will go off only once for each setting. if the RSI crosses and recrosses the trend line within the open bar it will only ring once. If you move it after ward it will reset to go off again taking the delay intoconsideration. Theres is another setting that you can set to make it go off on the close of the bar. that is if the RSI crosses the trend line it will not go off untill the bar actually closes to prevent any premature signals. There is a dialog box option but its not to turn it on/off, its purpose is to warn the user of the cross, that is the box pops up and remains on the screen till the user clicks OK. If ones leaves the computor for a trip down the hall. if it goes off while hes gone the box will be there to show it went off. if you like make a list of what you would like included i will try to create a copy to fit your needs. Take your time and complete the list as I dont like to rewrite things for one change after another. What part of Canada? Keit

It wasn't your RSI Trend Line indior. I had another chart with Chin bars on it, that I was unaware of, hidden beneath the one with the RSI Trend line on it. What an amateur mistake to make. For some reason the Chin Bars were not making their usual alert sound and that is what confused me.(Embarrassed.) I use RSI3 trend line breaks a lot. I find if I combine those with trend lines on the chart, the RSI trend lines usually break first and then the chart ones follow. An alert on a RSI trend line break is a great feature and i was surprised...

It wasn't your RSI Trend Line indior. I had another chart with Chin bars on it, that I was unaware of, hidden beneath the one with the RSI Trend line on it. What an amateur mistake to make. For some reason the Chin Bars were not making their usual alert sound and that is what confused me.(Embarrassed.) I use RSI3 trend line breaks a lot. I find if I combine those with trend lines on the chart, the RSI trend lines usually break first and then the chart ones follow. An alert on a RSI trend line break is a great feature and i was surprised...

[Giyeno97]

Thank you for everything and a happy new year 2011 Regards Madeinparis